Item Notes:  Partall Paste Wax #2
Is a general purpose polishing compound made from a blend of hydrocarbon and microcrystalline waxes. For use on moulds where standard silicone waxes hinder the post finishing operations or a primer coat to create a smooth mould surface prior to application of Partall Film # 10. Partall Paste Wax #2 may also be employed as an inexpensive edge wax on larger moulds.
Code: PART Size: 1.36kg
 Partall PVA Film #10
Is a water/alcohol-based Polyvinyl Alcohol solution of water-soluble, film forming materials. For use after paste wax and is ideal for separation between polyester and epoxy resins and various mould surfaces. It will not shrink or pull away from corners or curved surfaces. Readily dissolves with water after use. Not recommended for use with resins containing or giving off water (phenolics) or automotive paint finishes. Use only over Partall #2 or TR-108 Paste Mould Release Wax.
Code: PVA100 Size: 100ml
Code: PVA250 Size: 250ml
Code: PVA1000 Size: 1 Litre
Code: PVA Size: 3.78 Litre
 TR-102 Regular Paste Wax
A high production paste release with excellent breakdown for fast, even coverage. Formulated for fast drying with a pure carnauba base. Extremely easy to apply and wipe off. May be allowed to sit during your breaks before being wiped off.
Code: TR-102 Size: 500gm
 TR-104 High Temp Paste Wax
Formulated to work well with heat accelerated applications. Breaks down and applies like TR-102, again allow to dry before removing. Less wax build-up than the conventional synthetic or paraffin releases due to the hard carnauba base.
Code: TR-104 Size: 500gm
 TR-108 Basic Paste Wax
Excellent for breaking in new moulds. Produces a deeper wax coating for added protection. Recommended for vertical surfaces and those areas where masking is required.
Code: TR-108 Size: 500gm
TR-210 Self Stripping Liquid Wax
A high production liquid mould release formulated to eliminate build-up problems. Produces a lustrous high gloss finish and sure positive releases. Reduced mould prep time, elimination of build-up and extended mould life are ways, TR-210 improves your efficiency.
Code: TR-210 Size: 3.78 Litres
TR-214 Regular Liquid Wax
Less volatile than TR210, it is a thin, effective release for non-skid, sandblasted, knurled or grained surfaces. Eliminates paste build-up or fill in that mars the finished parts.
Code: TR-214 Size: 3.78 Litres
TR-301 Sealer Glaze
A unique blend of glaze and sealers. Closes mould pores and seals new or re-conditioned moulds with excellent results.
Code: TR-301 Size: 3.78 Litres
|